Garage Door Track Replacement Cost: Complete Price Guide

In most cases, garage door track installation or replacement costs between $200 and $450. Your actual cost will depend on your track width, track material, door size and labor rates in your area. While you can tackle some minor repairs to vertical tracks on your own, more severe damage including bent or severed tracks may require professional attention. 

Depending on their size, residential garage doors range between 130 and 350 pounds. Given this, sturdy and securely mounted garage door tracks are a necessary component in any safe home setting. We recommend getting multiple quotes from professionals so you can fully survey your track material and cost options 

Understanding Garage Door Tracks: Function and Importance

In short, garage door rails or tracks guide your garage door’s movements and hold their weight while being raised and lowered. They provide a smooth and stable lane for rollers which should enable easy manual or automatic garage door mechanisms. Rusty, dented or bent tracks can result in damaged rollers, broken springs, malfunctioning electrical opening systems and more long-term defects.

Most garage door track systems break down into the following components:

• Vertical tracks: These pieces are mounted to your garage floor and stand fully upright. Your garage door sits between these pieces when it is closed.
• Horizontal tracks: Horizontal tracks are secured to your garage’s ceiling or rafters. Securely mounting these pieces is especially important, as they must hold your door’s weight whenever it is opened. 
• Curved tracks: These pieces are transition components between vertical and horizontal tracks. Bends or dents in these sections are far more difficult to repair and will often require full replacement if damaged.
• Brackets: Mounting components secure all tracks or rails to the ceiling rafters or the wall beside the garage doors.

Excluding brackets, the rail components above range between one and three inches wide and correspond to similar garage door roller sizes. If you’re attempting a DIY replacement, you’ll have to be sure to choose the right track size to match your current doors and rollers.

Signs Your Garage Door Track Needs Replacement

If your garage doors aren’t quite working up to standard, a quick diagnostic check may be in order. There are a few common signs that might mean your garage door tracks need some maintenance or replacement:

• Visible bends in the garage door track: This is one of the more obvious signs of garage door track issues. You can repair some minor bends or dents with a mallet or pliers, but more severe track deviations may require that you hire a garage door technician.
• Excessive noise when raising or lowering your doors: Misaligned or bent tracks can cause your garage doors to make more noise while in operation. We recommend conducting a full inspection if you notice this.
• Garage door off track: Bends, dents or gaps in your existing track can force your rollers out of their tracks and lead to your garage door falling when raising or lowering it. This presents safety concerns aside from the issues with functionality.
• Visible rust accumulation: Most modern garage door tracks are made of galvanized or stainless steel. This should prevent rust from forming. However, over time, your garage door rollers can wear away the interior track’s protective coating, which can allow rust to form from the inside out. This slows down garage door operation and can weaken the tracks long-term.
• Slow opening and closing of your doors: This often accompanies some of the other issues listed here. If you notice that your electric door opening system is straining to lift your doors, or that your rails seem to buckle slightly as your doors are being raised, it could be a sign of trouble.

As mentioned, some of the issues above can be handled without professional assistance. Rust removal with a wire brush and white vinegar, or dent or bend correction with basic tools are relatively easy DIY fixes. 

That said, any more complex repairs are best handled by a professional garage door technician. They have the needed training to work around heavier doors and high-tension garage door springs. Schedule your own free track inspection today if you think you’ll require assistance.

Expert Tips>>>Common Reasons Your Garage Door Tracks Need To Be Replaced

Garage Door Track Replacement Cost Breakdown

On average, garage door track repairs or replacements range between $150 and $450. The wide cost range reflects varying local labor rates, garage door size, track material and type, and the severity of repairs needed. 

Data from the Bureau of Labor Statistics shows that mechanical door repairers make between $17.42 and $33.53 per hour. Using the mean wage of $23.39, a typical two- to four-hour repair or replacement call could cost between $46.78 and $93.56 in labor alone. If you’re working with a larger company, they will charge a markup for labor, beyond what their workers actually get paid. 

Labor aside, your component cost could include the following:

*Source: Cost data is from retailers, including Amazon, Home Depot and DDM Garage Doors. Prices are accurate as of March 6, 2025.

Any time you hire a trained technician to operate in your home, unexpected factors can raise the cost of your needed service. With garage doors, accessibility and garage door size are the core concerns. High-lift garage doors, which extend beyond the typical seven-foot openings for residential use, can be more costly to repair.

Repairing your garage door track early is always a smart choice. Precision Garage Door Service lists the typical cost of replacing a garage door at anywhere from $750 to $6,325 and up. Neglecting maintenance or repairs when garage door components malfunction can lead to far costlier fixes in the future.

Track Repair vs. Complete Replacement: Cost Comparison

In many cases, you’ll be able to avoid total replacement if there is a minor dent or bend in your garage door rail. Fixr lists the average repair cost for garage door tracks between $100 and $175. Full replacement often costs between $200 and $450.

Many professionals will lean towards recommending full replacement if there is a severe bend in the track, or if there is any structural damage. It is far easier for a contractor or home service pro to offer guarantees or warranties for their work when conducting a full replacement with new components.

DIY vs. Professional Garage Door Track Replacement

Not all garage door track problems require the same urgency. Slightly bent or dented tracks that affect your rollers are easy fixes that most homeowners can attempt. You can also attempt full replacement of vertical garage door tracks if your door can be raised. Most of these repairs require some basic tools, including:

• Rubber mallet
• Claw hammer
• Screwdriver or drill
• Tape measure
• Level
• Pliers
• 10- to 12-foot ladder

If you notice that your garage door is off track, or that the rails are severely bent or in a hard-to-reach spot, hiring a licensed pro is the way to go. If you already have the needed tools, your only costs will be for materials. This can range from a few dollars, to $175 and up, depending on the components you need replaced or repaired.

We recommend that you call a local technician and get a quote for professional replacement or maintenance. Their labor often comes with warranties and the expertise to identify any other issues with garage door components that you may not have noticed.

The Professional Garage Door Track Replacement Process

When people hire professionals for any home service, convenience and safety are front-of-mind. Calling a well-reviewed garage door technician will involve the following steps:

• Initial inspection and quote: Your technician will come to your home and fully look over your garage door tracks and entire system. Then, they will quote you a ballpark rate based on their assessment.
• Schedule a service time: If you agree to the quoted rate, you’ll set a time and date for service to be rendered. You may have to pay a deposit of up to 50% of your quote to cover material costs at this time. 
• Securing the door: Your technician will lock your garage door in place either open or closed, depending on which track section has to be replaced. This can involve a full removal of the door if your tracks or rollers require total replacement.
• Removal of old tracks: All garage door rails will be removed from their brackets or wall mounts.
• Installation of new tracks: Your technician should have all replacement parts on-hand before starting your replacement. They will align your new tracks and secure them to the mounting brackets and wall.
• Roller transfer: This step is only necessary for full track replacements. Once the tracks are mounted, and your garage door is in position, your technician will place the rollers back inside the rails, effectively re-mounting your garage door.
• Adjustments: This is an all-around system check for structural integrity and function. Your technician will look at all components and determine if your rollers operate smoothly within the new tracks. 
• Final inspection: After a test-operation of your manual or automatic opening system, your technician will notify you that your garage door track repair or replacement is complete.’

Note that you will usually have to be home for your garage door technicians to conduct repairs of any kind. Most repairs take between two and four hours to complete, while full track replacements can take four to eight hours or more. 

The length of your service call will depend on door size and the extent of the repairs needed. Regardless of why you need garage door repair, you should try to clean the work area to the best of your ability and park your cars outside of your garage until work is finished.

Additional Factors That May Affect Your Track Replacement Cost

When assessing garage door repair cost, your technicians will take the following into account:

• Door size: Double-wide or 16-foot doors are more cumbersome and may require more workers to safely remove and re-mount if your tracks need full replacement. This means you’ll be paying a higher hourly rate.
• Door type: High-lift garage doors are more commonly seen in auto shops than in residential settings. However, these require more vertical track length to lift up to their full height on your garage ceiling. More difficult access will lead to more time being taken for even simple repairs.
• Unexpected repairs: Garage door track repairs and roller replacement are two maintenance tasks which most commonly go together. If your technician conducts their inspection and sees that you require this, spring repair or replacement, or other such repairs, you’ll end up paying more for materials and labor.

In most cases, it will be easy for you to see whether any of these factors apply to you. The majority of homeowners requiring such service have conventional garage doors with regular lifting mechanisms and heights. You’ll be informed of any special circumstances when you get a quote from a professional.

Frequently Asked Questions About Garage Door Track Replacement Costs